Thirty six fiber runs are distributed from a 2-U chassis. In this application diagram, eighteen 2GXT plug-in modules are installed in a 19-module chassis for high-density fiber distribution from a Gigabit copper switch. The conversion from copper to fiber are on separate and independent channels, so there is no cross-connection between channels.Ĭhassis-Based Dual-Channel Media Converters In this application diagram, the 2GXT functions as a dual-channel media converter, providing connectivity between two fiber links and two RJ-45 ports on a copper switch. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input. The hot-swappable plug-in module can be mounted in a 19 or 5-Module iConverter chassis with redundant AC and DC power supplies. ![]() The standalone module can be DIN-Rail mounted using the optional DIN-Rail mounting bracket (8250-0). The 2GXT standalone unit is available with an external AC to DC power adapter or with a 2-pin terminal connector for direct connection to DC power. The management module provides access to the advanced features available on the module. IConverter 2GXT media converters are available as compact, unmanaged standalone units, or chassis plug-in modules that can be managed with a Management Module (NMM2) or Network Interface Device (NID) installed in the chassis. The 2GXT features user-selectable Link Propagate and Link Segment modes to facilitate quick fault detection, isolation and reporting. The 2GXT also supports port-level MIB statistics, and reporting real-time packet statistics to provide performance and operational monitoring. The 2GXT features two Gigabit Ethernet backplane ports for connectivity to adjacent iConverter modules in a chassis for multi-port and multi-service configurations.Īdvanced features include IEEE 802.1Q VLAN and 802.1p Quality of Service prioritization, and Port Access Control, which provides the ability to enable or disable individual ports to control delivery of services. The RJ-45 port supports 10/100/1000 and Half/Full-Duplex auto-negotiation with both hardware and software manual override controls. The SFPs also enable adaptability to different fiber types and distances, and support Coarse Wave Division Multiplexing (CWDM) and Dense Wave Division Multiplexing (DWDM) to increase the capacity of fiber infrastructure. The 2GXT supports both 100BASE-X and 1000BASE-X SFPs to provide flexible connectivity to Fast Ethernet or Gigabit networks, and simplifies inventory management in large networks with multiple data rates. ![]() The dual SFP fiber ports can be configured to provide 1:1 uplink protection with less than 50ms switchover when the 2GXT is deployed as a four-port switch. The 2GXT is a dual-channel media converter and four-port switch with two 10/100/1000BASE-T RJ-45 ports and two Small Form Pluggable (SFP) ports. IConverter 2GXT Ethernet fiber media converters are members of the modular iConverter Multi-Service Platform.
0 Comments
Leave a Reply. |